ADATA Premier 32GB DDR4 3200MHz CL22 Desktop U-DIMM RAM, 1 x 32GB, 1.2V, 288-Pin, Green | AD4U320032G22-SGN
Original price was: ₱24,100.00.₱20,995.00Current price is: ₱20,995.00.
- Brand: ADATA
- Model: Premier DDR4 3200 U-DIMM
- Part Number: AD4U320032G22-SGN (single tray)
- Type: DDR4 desktop U-DIMM, 288-pin, unbuffered, non-ECC
- Capacity: 32GB (1 x 32GB)
- Speed / Latency: 3200MT/s, CL22, JEDEC standard (no XMP needed)
- Voltage: 1.2V
- Build: Green PCB, no heat spreader
- Note: Desktop only. Not for laptops (SO-DIMM) or DDR5 motherboards
Price Drop Alerts & Price History
-
Authorized
Dealer -
Nationwide
Shipping -
Store &
RMA HUB -
Expert
Support -
7-Day DOA
Protection -
Community
Trusted -
Turnstile
Protected -
reCAPTCHA
Secured -
Tested &
Verified
Product Overview
The ADATA Premier 32GB DDR4-3200 is a plain, JEDEC-standard desktop memory stick: one 32GB unbuffered DIMM, CL22, 1.2V, green PCB, no heat spreader and no lighting. It is built for buyers whose goal is more capacity on a DDR4 desktop, not faster benchmarks.
Because it runs at its rated 3200MT/s straight from the SPD, there is no BIOS setting to change and nothing to tune. That makes it a sensible fit for office PCs, school and family desktops, small-business workstations and older DDR4 gaming builds that simply need more room for browser tabs, spreadsheets, photo editing or virtual machines. A single 32GB stick is also the easy way to reach 32GB on a budget board with only two slots while leaving the second slot free for later.
Key Features and What They Mean
32GB on one stick
With 32GB per module, two of these give a DDR4 board 64GB using only two slots. ADATA lists the 32GB module with a 2048 x 8 chip organization, so it is a higher-density stick than the 8GB and 16GB versions of the same series. In our assessment, if you plan to run two sticks, buy them together: mixing this module with older RAM of a different brand or density works in many systems but is never guaranteed.
DDR4-3200 CL22 at standard voltage
3200MT/s at CL22 works out to about 13.75 ns of first-word latency (Netcodex calculation). That is the JEDEC baseline for DDR4-3200, slower in latency than gaming kits rated CL16, but it runs at 1.2V without XMP, which is exactly why it is stable on boards and prebuilt PCs that do not allow memory overclocking. Peak bandwidth is up to 25.6GB/s per module.
No heat spreader, low profile
The bare green PCB keeps the module at standard DIMM height, so it clears large tower coolers that overhang the first slot. At 1.2V a standard module does not need a heat spreader for ordinary desktop use, even in a warm room without aircon, as long as the case has some airflow.
Competitive Positioning
This is a value, capacity-first module. Against heatsinked gaming kits rated DDR4-3200 CL16 or DDR4-3600 CL18, it gives up latency and any overclocking headroom, and it has no styling. What it offers in return is a simple JEDEC configuration that boots at its full rated speed on almost any DDR4 platform that supports 3200MT/s. For gaming on a Ryzen build, a dual-channel kit with lower timings will usually be the better buy; for capacity and reliability per slot, this is the more practical choice.
Philippine Buyer Perspective
Our Take
For an older DDR4 office or home desktop that slows down from running out of memory, a single 32GB stick is a clean upgrade with no settings to change. If the PC already has one 8GB stick, adding this gives 40GB in mixed capacity; that often works, but part of the memory then runs in single channel, so for the best performance we would rather see two matched 32GB modules, or a matched pair of smaller ones, running in dual channel. Gamers chasing frame rates should look at a dual-channel kit with lower latency instead.
Known Compatibility and Setup Notes
Possible consideration: Some CPUs officially support lower memory speeds than 3200MT/s (for example several Intel 10th Gen Core i3 and i5 models are rated for DDR4-2666). On those platforms the module simply runs at the lower supported speed. ADATA notes that actual speed may vary by platform or CPU.
Recommended: For dual-channel operation, install sticks in the slots your motherboard manual marks for two modules (often A2 and B2), and use matching modules.
Who Should Buy This
| ADATA Premier DDR4 3200 U-DIMM 32GB Specifications | |
|---|---|
| General | |
| Brand | ADATA |
| Series | Premier DDR4 3200 U-DIMM |
| Manufacturer Part Number | AD4U320032G22-SGN |
| Store SKU | AD-AD4U320032G22-SGN |
| Package Type | Single Tray (the -SGN suffix). Bulk version: AD4U320032G22-BGN, retail box version: AD4U320032G22-RGN |
| EAN | 4710273776590 |
| Memory | |
| Memory Type | DDR4 SDRAM |
| Form Factor | U-DIMM (unbuffered desktop DIMM), 288-pin. Not a laptop SO-DIMM; the SO-DIMM version is AD4S320032G22-SGN |
| Capacity | 32GB (1 x 32GB single module) |
| Speed | DDR4-3200 (3200MT/s), PC4-25600 |
| Bandwidth | Up to 25.6GB/s |
| CAS Latency | CL22 |
| True Latency | 13.75 ns (Netcodex calculation: 22 x 2000 / 3200) |
| Chip Organization | 2048 x 8 |
| ECC | Non-ECC |
| Overclocking Profile | None (JEDEC standard module, no XMP or EXPO profile) |
| Power and Environment | |
| Operating Voltage | 1.2V (VDD and VDDQ = 1.2V +/-0.06V) |
| VPP | 2.5V (+0.25V / -0.125V) |
| Operating Temperature | 0 to 85 degrees C |
| Standards | JEDEC compliant, RoHS compliant |
| Physical | |
| PCB | 8-layer PCB, green |
| Heat Spreader | None (bare module) |
| Single Tray Package Size | 170 x 55 x 9 mm (ADATA datasheet) |
| Compatibility | |
| Platforms (ADATA) | Intel Core 8th, 9th and 10th Gen; AMD Ryzen 2nd and 3rd Gen. Actual speed may vary by platform or CPU |
| Fits | Desktop motherboards with DDR4 DIMM slots only. Not compatible with DDR5 or DDR3 boards, or with laptops |
| Packaging Weight | 0.25 kg |
|---|---|
| Packaging Dimensions (L×W×H) | 20 × 8.5 × 3.9 cm |
| Brand | Adata |
| Desktop RAM | DDR4 |
Only logged in customers who have purchased this product may leave a review.




















Reviews
There are no reviews yet.